1.
Purpose: Flush the impurities and silt in the pipe in case of the blocking.
2.
Open the protective plastic sheet and protective cover Turn on the tap and
open up the supply valve rod to flush the pipe. Close the spool and test the
pressure resistance and tightness to make sure there no leakage.
3.
Blocked all outlet of pipes with plastic plugs(1/2) and turn on the tap. Check
whether the connection port of the upper of the outlet pipe are tight and
the status of pipeline pressure. Make sure there is no leak-age.
4.
After the test of tightness, revere the protective plastic sheet and
protective cover.
5
Test of Water & Tightness
Summary of Contents for AQUAECO CONRAD AQM-CND-410 Series
Page 2: ......
Page 4: ...1 2 3 4 HOT COLD ...
Page 7: ...Note ...
Page 8: ...INM CND 410 XX 04 22 www sanipexgroup com AQUAECO WASHROOM AND PLUMBING SOLUTIONS ...
