5
d.
Adjust the temperature adjustment knobs to the desired temperature and ensure
the reflection of the device.
WARNING: When the device is started for the first time, until the air in the gas pipe
is expelled, the device may fail several times with ignition errors. In this case turn
the on / off switch to off position and wait for 3 seconds to turn your device on
again. (Figure 1)
5-DAILY USAGE OF THE BOILER
Summer / Winter usage mode selection; When there is no need to use the heater
heating feature of the device, the device can be switched to summer mode to
operate only the domestic water heating. To make this setting, you need to the On /
Off switch to position.
WARNING: When the device is off, the blockage safety of the pump is a active , the
frost protection is not active.
a - When the device is used in summer mode and domestic water circuit, there is (
) mark on the screen. For domestic water adjustment, adjust the (
) button in
the direction of the thickness of the lines and adjust the desired temperature by
looking on the screen. Pump blockage protection and frost protection are active in
the summer position.
b - When the device is switched to winter mode, there are ( ) and (
)signs on the
screen. For this choice; The ( )mode setting button should be between the min
and max texts.
c - For the adjustment of the radiator temperature, adjust the desired temperature
ac-cording to the temperature value on the screen by turning the ( ) button in the
direction from min to max.
d - For domestic water adjustment, adjust the ( )button in the direction of the
thickness of the lines and adjust the desired temperature by looking on the screen.
Domestic Water
adjustment knob
Heater
Button
Figure.1
On/Off and Summer/
Winter position
button
