Sangoma Netborder SS7, User Manual

Page: 81 / 317

v1.14
81
Field Name Possible
values Default
Values Description
Message Identifier
Type IP-PORT
IP
IP-PORT Media gateway Controller message identifier
(MID) type field will be used by Media Gateway
to identify the peer.
Message identifier value will be built based on
MID type field.
For example:
If MID type is IP-PORT then Message identifier
format will be
“[IP-Address]:Port”
If MID type is IP then message identifier format
will
“[IP-Address]”
Note: IP-Address and Port values will be as
defined above.
IP Address NA NA Media Gateway Controller IP address.
Port NA 2944 Media Gateway Controller Port number
Default: 2944
H.248 Encoding
Scheme TEXT
BINARY TEXT Encoding scheme of MEGACO protocol which
will be used by Media Gateway while
encoding/decoding the H.248 messages.
Transport Protocol UDP
TCP
SCTP UDP Media Gateway will use the transport type field
to decide which transport to use for
transmitting/receiving MEGACO messages.
NOTE: currently we are supporting only
UDP/TCP.

Once the Media Peer is configured the Megaco configuration section is complete.

Proceed to TDM Termination for Media Gateway