Calling up the station memories
Stored stations can be called up directly:
Using the keys ,select the memory slot in which the desired
station is stored.
Level p1=slots 1-6
Level p2=slots 7-12
Note
If this does not function as described above, press the
RESET
key
(e. G. with a pen nib) and begin the adjustments from the
beginning again.
The volume
can be adjusted with the VOLUME dial .
This alarm clock is equipped with two alarm systems which can be
operated independently of each other either with an acoustic
alarm (Human Wake System/HWS) or with a radio (radio alarm clock).
First select either alarm 1 or 2, then select the alarm clock mode
(radio or acoustic alarm),then set the alarm time and activate the
alarm clock.
Alarm with radio
1
.Select the station desired (programming buttons 1-12).
2
.Set the desired radio alarm volume.
3
.Select alarm system 1 or 2 by pressing and holding the alarm
mode button 1 or 2 for at least 2 seconds. The alarm
radio or acoustic alarm (HWS) flashes .
4
.Select the radio symbol using the button or under the
cover.
5
.Once again press the station programming button selected
under 1.
6
.Press the radio alarm button 1 or 2, to confirm your selection.
The hour display flashes .
Continue with
Set alarm time
...
Alarm Clock
Instructions for use for the clock radio
6
13
14
2 9
8