QDS-9400 - User Guide, Rev. 1.0
// 40
7.13.2.
Panel Power Selection for Optional MIPI (3V3 5V 12V) (Optional)
The optional 2.0 mm pitch "Panel Power Selection for Optional MIPI" jumper can be used to select MIPI panel power
voltage.
Figure 28: Panel Power Selection for Optional MIPI (3V3 5V 12V)
Table 31: Pin Assignment Panel Power Selection for Optional MIPI (3V3 5V 12V)
Jumper 1 Position
Description
Pin 1-2 Pin 3-4 Pin 5-6
X
-
-
Panel Power = +3.3 V
-
X
-
Panel Power = +5 V
-
-
X
Panel Power = +12 V
“
X’’ = Jumper set (short) and ‘‘-’’ = jumper not set (open)
