S&T Kontron QDS-6100, User Manual

Page: 36 / 40

QDS-6100/6200 - User Guide, Rev. 1.0
www.kontron.com // 36
7.10. Touch Panel Wafer (TP)
The 6-pin 2.0 mm pitch touch panel wafer TP supports touch panel control.
Figure 21: Touch Panel Wafer (TP)
Table 28: Pin Assignment (TP)
Pin Signal Description Note
1 3.3V 3.3 V power supply
2 TP-INT Touch panel interrupt line
3 TP-RST Touch panel reset
4 TP-SCL Touch panel serial clock line
5 TP-SDA Touch panel serial data line
6 GND Ground
7.11. RGB LED Wafer (LED)
The 4-pin 2.0 mm pitch RGB LED wafer LED provides user-defined LED indicator signals.
Figure 22: RGB LED Wafer (LED)
Table 29: Pin Assignment (LED)
Pin Signal Description Note
1 LED_R Red LED
2 LED_G Green LED
3 LED_B Blue LED
4 GND Ground