KWS 3000-CML - User Guide, Rev.1.0
// 53
Do not dispose of lithium batteries in general trash collection. Dispose of the battery
according to the local regulations dealing with the disposal of these special materials, (e.g.
collecting points for dispose of batteries)
.
To replace the lithium battery on the motherboard, perform the following:
1.
Shut down the product properly using power button, PSU switch and disconnect the power cable from the
input power socket or mains power outlet.
2.
Open the service cover.
3.
Release the clip holding the lithium battery to slide the battery out of the battery holder.
Figure 19: Battery Holder Location
4.
Insert a new lithium battery in the battery holder, while paying attention to the polarity of the battery to ensure
the positive (+) terminal side faces upwards.
Figure 20: Lithium Battery Polarity
5.
Close the service cover.
Removing the battery clears the password, date, time, user default profile and MAC address.