KSwitch D3 Unmanaged Fast Ethernet Switch - Preliminary User Guide, Rev. 0.9
// 19
4.1.
Faceplate Features
4.1.1.
RJ45 Copper Ethernet Ports
To connect to a PC use a straight-through or a cross-over Ethernet cable and when connecting to an Ethernet device
use UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair) Ethernet cables.
The switch supports eight 10/100 Mbps copper RJ45 Ethernet ports and up to two 100 Base fiber SFP slots on the
10-port variant and 16 copper 10/100 Mbps RJ45 Ethernet ports on the 16-port variant.
Figure 3: RJ45 Copper (10/100 Mbps) Ethernet ports (10-port and 16-port)
Table 3: Ethernet Ports (RJ45 copper) Connector Pin Assignment
Pin
Signal
1,2
T/Rx+,T/Rx-
3,6
R/Tx+,R/Tx-
For further copper/fiber port combination, see Chapter 7.1/: Hardware Specification.