KSwitch D1 UGPD Unmanaged Gigabit PoE Ethernet Switch - Preliminary User Guide, Rev. 0.9
// 23
4.1.5.
PD Port
A PoE compliant device powers the PD input port with a maximum of 56 VDC and 60 W (PoE++). The PD requires
standard CAT5e cables or better with a maximum length of 100 m.
Figure 8: PD Input Port
PD IN supports IEEE 802.3 af/at (PoE++)
4.1.6.
Ground Connector
The switch must be grounded properly for optimum system performance.
Figure 9: Ground Connector
When attaching the ground wire to the switch ensure that the wire size range is
18 to 14 AWG, and resistance is less than 5 ohms.
