KBox E-420-R1K/V1K - User Guide, Rev. 1.1
// 38
4.
Place the KBox E-420-R1K/V1K onto the mounting surface by sliding the hooked mounting bracket into the based
mounting bracket (Figure 14).
5.
Secure the hand-screw knob located on the hooked mounting bracket to fix two brackets (Figure 14).
Figure 14: Securing the KBox E-420-R1K/V1K onto the mounting surface
7.1.2.
VESA Mounting
Depending on the ordered KBox E-420-R1K/V1K configuration, your system may be supplied with a DIN rail mounting
kit (Figure 15).
Figure 15: Optional DIN rail mounting kit
1 DIN Rail Clamp
2 DIN Rail Spring
3 Mounting Hole
4 M3 x 4 mm Screw
To mount the KBox E-420-R1K/V1K please proceed according to the steps described:
1.
Secure the DIN rail clamp on the rear side of the chassis with the supplied screws (M3 x 4 mm).
4
4
4
2
1
3
3
3
