KBox C-103-CFL-x - User Guide, Rev. 1.0
// 54
6.3.3.
DIP Switch
The baseboard of the KBox C-103.CFL is equipped with an DIP switch (Figure 38, pos. 2). The particular DIP switches
have the following functions:
DIP switch 1-4: User defined
DIP switch 5:
T.B.D. (for future use by manufacturer)
DIP switch 6:
ON: Fan tray present (therm LED behavior change, green
amber)
6.3.4.
Expansion Socket for PCIe Mini Cards
Depending on the system configuration ordered, your KBox C-103-CFL can be extended with a PCIe Mini card.
The KBox C-103-CFL provides one internal Mini PCIe socket for PCIe Mini cards. The Mini PCIe
socket is on the lower side of the baseboard and can be only at factory equipped with an
expansion card.
6.3.5.
Riser Cards Expansion Sockets for PCI/PCIe Cards
Depending on the system configuration ordered, your KBox C-103-CFL can be extended with 1x PCI (32 bit) card and up
to four PCIe x4/PCIe x1 cards (full-height, half-length form factor) via corresponding riser cards.
For installation/removing of PCI/PCIe cards into/from the corresponding socket
(Figure 42, pos. 5 and pos. 6, Figure 43, pos. 5 and pos. 8), please refer to the subsection 6.3.6 “Installing/Removing
PCI/PCIe Expansion Cards“.
To expand your system with expansion cards, please observe the power consumption
specified in
chapter 12/ “Technical Specifications”.
The power consumption of each expansion card does not exceed 15 W.
Please observe that:
KBox C-103-CFL-4 supports up to:
2x PCIe x4 and 2x PCIe x1 expansion cards
KBox C-103-CFL-2 supports up to:
2x PCIe x4 expansion cards or
1x PCIe x8 expansion cards or
1x PCIe x4 and 1x PCI (32 bit) expansion cards.
KBox C-103-CFL-1 supports:
1x PCIe x4 expansion card or
1x PCIe x8 expansion card
KBox C-103-CFL-0:
Can’t be equipped with PCI/PCIe expansion cards.
For system configuration refer to the area marked “C” in the section 4.4. and for expansion
card installation refer to the subsection 6.3.6 “Installing/Removing PCI/PCIe Expansion
Cards”.
