KBox C-103-CFL-x - User Guide, Rev. 1.0
// 38
5/
System Extensions
Optionally your KBox C-103-CFL can be equipped by factory only, with following ports and additional components:
Serial port RS232 or RS422 via an adapter module
CAN port: via an adapter module
DisplayPort: via corresponding adapter module
WideLink Port: via corresponding adapter module
Fan Tray: an additional component connected to the KBox C-103-CFL-4, KBox C-103-CFL-2 and KBox C-103-CFL-1
Fieldbus: (Profibus, Profinet or Ethercat): via internal factory mounted adapter module
Second 24 VDC input (X201)
GPIO module
You have to order these components separately, in order to extend your KBox C-103-CFL at the factory.
Example of system configuration, see below:
Figure 26: KBox C-103-CFL-4 shown with optional
interfaces and with removable drive bays
1
Serial port RS232/RS42 (X205)
2
2x antenna for LTE M.2 module
3
CAN port (X204)
4
DisplayPort (X203)
or
5
Widelink port (X202)
6
Fieldbus (ProfiNet etc.),
dual RJ45 (X206)
(depending on the ordered option)
or
2x WiFi antennas for mPCIe module
7
2
nd
24 VDC input connector (X201)
or
Fieldbus (ProfiBus etc.) on D-Sub 9
(depending on the ordered option)
1
3
4
5
7
6
2
