COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2
www.kontron.com
// 32
Pin
Signal
Cable
Colour
12
3,3
V
Orange
13
3,3
V/
3.3 V sense
Orange/
Brown
14
−12
V
Blue
15
GND
Black
16
Power ON
Green
17
GND
Black
18
GND
Black
19
GND
Black
20
Reserved
None
21
5
V
Red
22
5
V
Red
23
5
V
Red
24
GND
Black
If any of the supply voltages drops below the allowed operating level longer than the
specified hold-up time, all the supply voltages should be shut down and left OFF for a time
long enough to allow
the internal board voltages to discharge sufficiently.
If the OFF time is not observed, parts of the board or attached peripherals may work
incorrectly or even suffer a reduction of MTBF.
The minimum OFF time depends on the implemented PSU model and other electrical factors
and needs to be measured individually for each case.
5.1.16.
8-pin ATX Power connector (J99)
Figure 17: ATX Power connector with 8 pins
Table 24: ATX Power connector with 8 pins
Pin
Signal
1
+12 V
2
+12 V
3
+12 V
4
+12 V
1
4
