COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2
www.kontron.com
// 23
5.1.2.
USB Connectors (J64, J65, J33, J63)
For every USB 3.1 port, one USB2 and one USB31 lane has to be bonded. Therefore the number of available USB 2.0
ports decreases with every used 3.1 port. Available are:
up to 8x USB 2.0
4x USB 3.1
Figure 7: USB Double Connector
Table 7: USB Double Connector
Connector
COMe USB 2.0
COMe USB 3.1
J64 Bottom
USB0
USB_SS0
J64 Top
USB1
USB_SS1
J65 Bottom
USB2
USB_SS2
J65 Top
USB3
USB_SS3
J33 Bottom
USB4
J33 Top
USB5
J63 Bottom
USB6
J63 Top
USB7
Intel starts counting USB Ports with 1 while COMe Specification starts counting with 0
USB Overcurrent: USB_OC_LED# indicates Overcurrent event on USB_OC_0_1#,
USB_OC_2_3#, USB_OC_4_5#, USB_OC_6_7#. Overcurrent event can be measured on Debug
Header. USB0_HOST_PRSNT can be pulled up by J77. USB OTG / Client not supported.
5.1.3.
Graphic Interfaces (J32, J39, J2, J14, J17)
Table 8: Graphic Interfaces
COMe Signal
Connector
DDI1
J32
DDI2
J32
DDI3
J39
LVDS
J2
eDP
J14
VGA
J17
