17
GB
Hints and Tips
Keyboard not working:
• Ensure the keyboard is switched on.
• Move the keyboard closer to the device.
• Restart the computer.
• Check battery installation. Replace battery if needed.
In Wireless mode:
• Make sure the Nano Dongle is plugged into a USB port and the
computer is on or try the Nano Dongle in a different USB port.
• If the Nano Receiver is plugged into a USB hub, try plugging it directly
into the computer.
• If keyboard performance is slow or intermittent around a wireless
network, unplug the Nano Dongle from the USB port and then reinsert
it. To reactivate the keyboard, switch it on, off and on again using the
ON/OFF switch on the bottom of the keyboard.
• If automatic pairing fails, pair the dongle with the keyboard manually.
a) Remove the dongle from your device USB port.
b) Switch on the keyboard.
c) Press and hold the ESC + Q buttons for 2 seconds to enter the
pairing mode and the LED indicator will flash.
d) Plug the dongle into the USB port within 10 sec.
e) After successfully connecting in 2.4GHz Wireless mode, the LED
indicator will light up.
