24
INSTALLATION
GB
17. Make sure your plumbing is suitable
for use with the dishwasher. If in doubt
contact a qualified plumber. This unit
MUST BE connected to COLD WATER
MAINS using the new water inlet hose.
OLD HOSE SETS MUST NOT BE RE-USED.
The water pressure from the water mains
needs to be at a minimum of 0.04 MPa
and a maximum of 1.00MPa.
t
Connect one end of the water supply
hose to your dishwasher, and then
connect the other end of the hose to
your water mains. Please ensure the
black rubber seal is in place.
t
After connecting the hose, turn on
your water mains and check for leaks.
t
Connect the dishwasher to the mains
socket.
Water mains
Y-Adaptor
(not included)
Connect
to another
appliance
if required.
Water supply hose
You may use a Y-Adaptor (not included)for an additional water feed for another appliance, for example
a washing machine. This is only applicable for cold water mains. A Y-Adaptor is available from most DIY
stores.
About the Water Supply Hose
The water supply hose consists of the double walls. The hose’s system guarantees its intervention by
blocking the flow of water in case of the supply hose breaking and when the air space between the
supply hose itself and the outer corrugated hose is full of water.
SDW60W15N_IB_5L_Final150521.indb 24
21/5/15 12:27 pm
