− 107 −
9. ADJUSTING THE POSITION OF THE SENSOR FOR DETECTING FLAPS
①
Adjust the positions of both right and left sen-
sors for detecting flaps to outside of 5 mm from
the needle entry, and the sewing direction (lon-
gitudinal direction) of both right and left sensors
to the position of 37 mm from the needle entry
to the operator side.
④
Adjust the lateral direction of sensor for detect-
ing right flap
❹
by loosening setscrews
❺
and
moving the sensor in the lateral direction.
⑤
Adjust the sewing direction of sensor for de-
tecting right flap
❹
by loosening screws
❻
and
moving the sensor in the longitudinal direction.
After the adjustment, be sure to perform
trial sewing and adjust the flap sewing
position with the panel.
Right flap
sensor light
②
Adjust the lateral direction of sensor for de-
tecting left flap
❶
by loosening screws
❷
and
moving the sensor in the lateral direction.
③
Adjust the sewing direction of sensor for de-
tecting left flap
❶
by loosening screws
❸
and
moving the sensor in the longitudinal direction.
Left flap
sensor light
Needle entry
Needle entry
37mm 5mm
5mm
❷
❶
❸
❻
❺
❹