SandenVendo SVE C36-XS, User And Maintenance Manual, Page: 36 / 57

Instructions for the installer, maintenance
technician and final user
Page 34 of 54
© SandenVendo Europe SpA
The adjustments to be made for the delivery of the products are listed below:
a) adjustment of the rear spacer (Baffle);
b) mechanical connection of the sales shelves;
c) setting the sales cam of the motor;
d)
setting in the software “mode” of sale (1D, 2D, 3D, 4D);
4.2.3.1 Regulating the baffle (rear spacer)
Each column of the vending mechanism can be adjusted to deliver the product according to a
delivery “
method
” that varies from
single to quadruple based on the format of the product.
Note: The height of the product, or products, to be sold must be less than the depth of the
mechanism.
To adjust the baffle to the correct position, work as follows:

Measure the height of the product you wish to deliver in that specific column;

Position the baffle at a distance of
“Product 10 mm” starting from the front gate.
M
D
OE
1D
P
R
OD
U
C
T
H
E
IGH
T
M
OD
E
2D
P
R
OD
U
C
T
H
E
IGH
T
M
OD
E
3D
P
R
OD
U
C
T
H
E
IGH
T
M
OD
E
4D
P
R
OD
U
C
T
H
E
IGH
T
P
RODUCT
H
EIGHT
+ 10mm
Baffle
Front
Left Side
Mechanism Column