Instructions for the installer, maintenance
technician and final user
Page 27 of 54
© SandenVendo Europe SpA
3.3.5.1 Coinmech Connection MDB / Executive
MDB
To connect the coinmech in MDB mode, insert the 6-way connector on the SVE01 board in
position J4.
Executive
To connect the coinmech in EXECUTIVE mode, it is necessary to use the harness p/n141427
and proceed as follows:
Insert the black 4-way connector of the harness p/n 141427 in position J1 on the SVE01
board;
Insert the 4-way female connector of the harness p/n 141427, on the 4-way male
connector coming from the harness p/n 145150 connected to the SVE01 board;
After connecting the harness p/n 141427, the coinmech can be connected;;
Use the 9-way connector and the 15-way connector of the coinmech by connecting them
with the relative counterparts of the wiring harness p/n 141427.
P
/N 1
4
5
1
5
0