SEE EXPLODED VIEW ON PAGE 7
15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 -
1
INSTALLATION INSTRUCTIONS
P/N: 76-2000
Approx. Install Time: 2Hrs 00Min
VEHICLE APPLICATION
Year:
2014 - 2016
Make:
Polaris
Model:
RZR 1000, XP4
Engine:
1000cc, Turbo (2016)
TOOLS REQUIRED
• 2.5mm, 4mm, 5mm Hex Key
• 10mm Wrench/Socket
• 5/16 Nut Driver
• Phillips Screwdriver, Flat Blade Screwdriver, Razor Blade, and Wire
Cutters
WARNING:
THIS EQUIPMENT SHOULD BE INSTALLED, ADJUSTED, AND SERVICED BY PERSONNEL FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THIS TYPE OF EQUIPMENT AND THE HAZARDS INVOLVED. FAILURE TO
OBSERVE THIS PRECAUTION COULD RESULT IN SEVERE INJURY. READ THIS MANUAL THOROUGHLY AND MAKE
SURE YOU UNDERSTAND THE PROCEDURES BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT. THE
PURPOSE OF THIS MANUAL IS TO PROVIDE YOU WITH INFORMATION NECESSARY TO SAFELY OPERATE,
MAINTAIN, AND TROUBLESHOOT THIS EQUIPMENT. DO NOT USE THIS EQUIPMENT FOR ANY REASON OTHER
THAN ITS INTENDED PURPOSE. FAILURE TO FOLLOW THESE INSTRUCTIONS WILL VOID ANY WARRANTY. KEEP
THIS MANUAL FOR FUTURE REFERENCE. THE INFORMATION CONTAINED IN THIS MANUAL IS SUBJECT TO
CHANGE WITHOUT NOTICE.
Product will intake and expel both air and loose materials with high force and velocity.
• Install product on roll cage, so air inlet is not blocked.
• Do not place face, hair, extremities, clothing, or other loose material in front of air inlet or outlet during use.
• Install product securely to roll cage and avoid placing hair, extremities, clothing, or other loose material in front of air inlet
during use.
Moving parts are sharp and could cause personal injury.
• Keep fan safety guard and exhaust cover in place while operating and after service.
• Disconnect product from power source before servicing.
Scavenge Fan is designed for use in conjunction with an UTV’s operating manual, and state and federal law.
• Keep your seat belt fastened and wear a helmet while operating the vehicle.
Risk of electric shock!
• Improper installation, maintenance or operation could cause serious injury or property damage.
BEFORE YOU START
• Please read the entire installation manual before proceeding.
• Ensure all components listed on page 10 are present.
• If you are missing any of the components, call our customer support at (909) 947-0015.
• Do not work on the vehicle while the engine is hot.
• Make sure the engine is turned off, the vehicle is in Park and the Parking Brake is set.
THREAD LOCKER USE
We have provided a small tube of thread locker in your kit.
Whenever you see the symbol above on a step of the
instructions apply 1 small drop of the thread locker to the
threads of the screws or bolts. This will keep your
hardware from vibrating loose during rough driving. If the
hardware ever needs to be removed, do so slowly to avoid
having the inserts strip out from the plastic.
