![background image](http://html1.mh-extra.com/html/san-ignacio/43820/43820_instruction-manual_4642993005.webp)
1. SAFETY WARNINGS
ො This appliance is not intended for being used by children from 0 to 8 years old. This ap
-
pliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should not play with the appliance. Clean
-
ing and maintenance shall not be performed by children.
ො For additional protection, the installation of a residual current device (RCD) having a
rated residual operating current not exceeding 30mA is advisable in the electrical cir
-
cuit. Ask your installer for advice.
ො If the power cord is damaged, in order to avoid risks, it should be replaced by the man
-
ufacturer, maintenance department or similar.
ො This appliance is not intended to be operated by means of an external timer or separate
remote-control system.
ො Only the appropriate connector must be used.
ො Do not use attachments not recommended or supplied for this product.
ො Disconnect the appliance from the power supply if it is left unattended and before as
-
sembling, disassembling or cleaning.
ො Household and Indoor use only.
ො To protect against the risk of electrical shock, do not immerse the unit, cord or plug in
water or other liquids.
ො The appliance is only intended for the purpose described in user manual. Do not use
the appliance or any part of it out of the intended use to avoid risks.
ො Before juicing, first confirm that the juice collector, strainer and rotor are in position.
Put the transparent cover on, fasten the handle, and then turn on the machine.
ො During juicing, make sure there is not too much juice and residues in the juice collector
and pulp container. If so, please turn off the power supply, clean up and then use the
device again.
ො The motor has an over-temperature protecting device. If the motor works for a long
time and gets too hot, the power supply will automatically cut off. After the motor
stops, pull out the plug of the power supply, wait for the motor to cool for about 30
minutes and then use it again.
ො Do not make the device work with no load or overloaded.
ො Blades are very sharp; it is dangerous to wash them with your hands. Always flush them
under the water tap and clean them with a soft brush.
ENG
Summary of Contents for 43820
Page 20: ......