99
0. Memory-data Clear : Delete the Station Name
1. Edit-File Clear : Delete the Macro Command File & Editor File
2. FEC-Recv-File Clear : Delete the received FEC-Recv-File
11-11
NBDP TEST
①
Press
[F10]
button on the keyboard and
Main Menu
screen shows.
②
Move the cursor to
7. NBDP
with
[
]
/
[
]
button
Press
[Enter]
and the following screen
shows.
③
How to operate NBDP Test function : Select cursor with
[
]
/
[
]
button
Press
[Enter]
and each function operates
1) Mark Transmission - 1.7 kHz~85 Hz signal is transmitted for 40 seconds
2) Space Transmission - 1.7 kHz + 85 Hz signal is transmitted for 40 seconds
3) Dot Transmission - 1.7 kHz - 85 Hz signal is transmitted for 40 seconds
4) Printer Test - Check the printer status by printing the test print
5) NBDP Rx/Tx Test - Test NBDP terminal by TX/RX signal.
6) Freq-Shift Correct - Function to compensate 1
st
Local frequency. Transmitter send
14MHz +1400Hz signal and exclusive receiver receives the signal and compensate the
1
st
local frequency
