Samsung XRN-1610 Page 6 User Manual Download

Page: 6 / 82

overview

featureS

The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk.

It also provides remote monitoring environment for video and audio over the network using a remote computer.

•

User-friendly UI

•

Supports a range of 4K camera resolutions (3840X2160, 4096X2160, 4000X3000)

•

Outputs a 4K high definition image using HDMI

•

Record and play video

•

Record and play audio

•

Supports ONVIF Profile S standard and RTP / RTSP protocols

•

Display the HDD operation status by HDD SMART

•

HDD overwrite enabled

•

Backup using USB 2.0, 3.0 protocols and external HDD

•

Simultaneous play of 16 channels

•

Various Search Modes (Time, Event, Text, Backup, ARB)

•

Various Recording Modes (Normal, Event, Scheduled Recording)

•

Alarm Input / Output

•

Remote Monitoring function by Windows Network Viewer

•

Live monitoring of the network camera

•

Installation Wizard Function (Easy Setup, Quick Setup)

package contents

Please unwrap the product, and place the product on a flat place or in the place to be installed.

Please check the following contents are included in addition to the main unit.

The appearance of the components may differ from the image shown.

Accessory category and quantity may differ depending on sales region.

For some regions, HDD is not pre-installed. HDD Fixing Screw, SATA Power Cable, SATA data cable

and SATA power/data cable quantity vary depending on the model.

USB

NETWORK VIDEO RECORDER

NVR

Mouse

Power Cable

Terminal block

Remote Control /

Remote Control Battery (AAA)

Network Viewer Software /

User Manual CD

User Manual or Quick Manual

Bracket Rack

HDD Fixing Screw

Bracket Fixing Screw

HDD SATA/Power cable (XRN-1610)

SATA Power Cable

(XRN-1610S

)

SATA Data Cable

(XRN-1610S)

Summary of Contents for XRN-1610



















































































Search results

Summary of Contents for XRN-1610

Reviews:

Related manuals for XRN-1610

Brands by name

Popular brands

Samsung XRN-1610, User Manual

Search results

Summary of Contents for XRN-1610

Reviews:

Related manuals for XRN-1610

Brands by name

Popular brands