91
2. Using a Network-connected Machine
IPv6 configuration
IPv6
is supported properly only in Windows Vista or higher.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
4
From the SyncThru™ Web Service
Activating IPv6
1
Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click
Go
.
2
If it’s your first time logging into
SyncThru™ Web Service
you need to
log-in as an administrator. Type in the below default ID and password.
We recommend you to change the default password for security
reasons.
•
ID: admin
•
Password: sec00000
3
When the
SyncThru™ Web Service
window opens, move the mouse
cursor over the
Settings
of the top menu bar and then click
Network
Settings
.
4
Click
TCP/IPv6
on the left pane of the website.
5
Check the
IPv6 Protocol
check box to activate IPv6.
6
Click the
Apply
button.
7
Turn the machine off and turn it on again.
•
You can also set the DHCPv6.
•
To manually set the IPv6 address:
Check the
Manual Address
check box. Then, the
Address/Prefix
text
box is activated. Enter the rest of the address
(e.g.,:3FFE:10:88:194::
AAAA
. “A” is the hexadecimal 0 through 9, A
through F).
