249
4. Special Features
Fax features
•
For basic faxing features, refer to the
Basic Guide (see
•
C48xFN/C48xFW series only (see
"Control panel overview" on page 24).
25
Automatic redialing
When the number you have dialed is busy or there is no answer when you send
a fax, the machine automatically redials the number. The redial time depends on
the country's factory default setting.
When the display shows
Retry Redial?
, press
(
Start
) button to redial the
number without waiting. To cancel the automatic redialing, press
(
Stop/
Clear
).
To change the time interval between redials and the number of redial attempts.
1
Press
(fax) >
(
Menu
)>
Fax Setup
>
Sending
on the control
panel.
2
Select
Redial Times
or
Redial Term
you want.
3
Select the option you want.
26
Redialing the fax number
1
Press
(
Redial/Pause
) button on the control panel.
2
Select the fax number you want.
Ten recently sent fax numbers with ten received Caller IDs are shown.
3
When an original is loaded in the document feeder, the machine
automatically begins to send.
If an original is placed on the scanner glass, select
Yes
to add another
page. Load another original and press
OK
. When you have finished,
select
No
when
Another Page?
appears.
27
Confirming a transmission
When the last page of your original has been sent successfully, the machine
beeps and returns to ready mode.
When something goes wrong while sending your fax, an error message appears
on the display. If you receive an error message, press
(
Stop/Clear
) to clear
the message and try to send the fax again.
Summary of Contents for Xpress C48x series
