28_ camera operation
camera operation
-
EXTERN : Ground to the grounding terminal to allow automatic switching between
COLOR and B/W (Black/White).
-
COLOR : The picture is always displayed in color.
-
B/W : The picture is always displayed in black and white.
y
BURST MODE : A ctivate or deactivate the burst mode to maintain or remove the color signal.
y
IR MODE :
When
IR LED is turned on in B/W, the objects can be clearly
identified due to the function that decreases screen saturation of
objects within a short distance.
y
DEfog :
You can use the defog mode to allow the camera to automatically
detect the fog density of the screen and display a clear image despite
smog, fog or general poor visibility.
1
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘DEFOG’.
2
Select a desired mode using the Function Setup switch.
-
AUTO : Adjust the level automatically.
-
Manual : Depending on the defog level set by the user, adjust the clarity of image.
(LOW, MIDDLE, HIGH)
-
OFF : Released state
M
`
If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be
also reduced. If you want to maintain the same level of defogging, set it to Manual.
`
If there is little fog and the manual fog level is high, the screen contrast can get high.
y
PriVaCY :
Mask an area you want to hide on the screen.
1
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘PRIVACY’.
2
Select a desired mode using the
Function Setup switch.
-
AREA : You can select up to 24
PRIVACY areas.
-
MODE : Determines whether to use
the area selected in the AREA.
DEFOG MANUAL SETUP
1.
LEVEL
MIDDLE
2.
RETURN
PRIVACY AREA SETUP
1.
AREA
AREA
1
2.
MODE
OFF
3.
MASK COLOR
GREEN
4.
TRANSPARENCY
OFF
5.
SEL POS
L_TOP
6.
X POS
--------
18
7.
Y POS
-
-------
33
8.
RETURN