26_ camera operation
camera operation
-
DISP ID : Display camera title on top left corner of the screen.
-
FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
-
LANGUAGE : You can select the menu language according to your requirements.
-
RETURN : Return to the SPECIAL menu.
y
Comm aDJ (Communication adjustment) :
This function sets up the camera
communication status when controlling the camera through an external control device.
-
PROTOCOL : Select the
communication
PROTOCOL.
(SAMSUNG-
T,Samsung-E, Pelco-D,
Pelco-P, Panasonic,
Bosch, Honeywell, Vicon,
AD, GE)
-
CAM ID : Determines the camera's
identification number (between 0 and 255).
-
BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
-
UART MODE : You can select NONE, EVEN or ODD for the parity bits.
-
RET PKT : Specify whether to return the same command to the controlling device
when a control command is delivered to the camera.
-
COAX : You can select whether to use COAX communication.
-
RETURN : Return to the SPECIAL menu.
y
imagE aDJ
1
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘IMAGE ADJ’.
2
Select a desired mode using the
Function Setup switch.
-
GAMMA : The setting range is 0.2 ~
1.0. The closer to 1.0 the
setting is, the darker it gets.
→
0.20, 0.25, 0.30, 0.35,
0.40, 0.45, 0.50, 0.55,
0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.0
-
PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the
higher the PED level gets.
-
COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
COMM SETUP
1.
PROTOCOL
SAMSUNG-T
2.
CAM ID
--------
1
3.
BAUD RATE
9600
4. UART MODE
8-N-1
5.
RET PKT
ENABLE
6.
COAX
ON
7.
RETURN
IMAGE SETUP
1.
GAMMA
0.45
2.
PED LEVEL
----
----
50
3.
COLOR GAIN
----
----
50
4. H-REV
OFF
5. V-REV
OFF
6. D-ZOOM
OFF
7. SHARPNESS
MIDDLE
8. PFR
OFF
9.
RETURN