Samsung WEC8500 Operation Manual Download

Page: 399 / 689

CHAPTER 8. Security

page 399 of 689

Figure 210. Configuration Window for Channel Validation

8.2.2.8

Configuring and Searching Black/White List

Operator can configure classification to distinguish authorized and unauthorized

APs/stations. The administrator configurable lists include <AP black-list, Station black-list,

Managed OUI, Managed/Neighbor AP>. The <Managed AP, Managed Station, Managed

SSID> are automatically configured and can be used only for search.

Configuration using CLI

1) Go to the configure



wids configuration mode of CLI.

WEC8500# configure terminal
WEC8500/configure# wids
WEC8500/configure/wids# lists

2) Configure the AP black-list.



ap-blacklist [MAC]

Parameter

Description

MAC

MAC address that will be used as AP black-list

3) Configure the station black-list.



client-black-list [MAC]

Parameter

Description

MAC

MAC address that will be used as a black-list of the station

4) Configure the Managed Organizationally Unique Identifier (OUI).



oui-whitelist [OUI]

Summary of Contents for WEC8500


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands

Samsung WEC8500, Operation Manual

Search results

Summary of Contents for WEC8500

Reviews:

Related manuals for WEC8500

Brands by name

Popular brands