Samsung WA54M8750 Series, User Manual

Page: 53 / 228

English 53
Maint
aining y
our w
asher
Protecting the top cover and the front frame
Do not place any heavy or sharp objects or
a detergent box on the washer. They can
scratch or damage the top cover of the unit.
NOTE
Since the entire washer has a high-gloss finish,
the surface can be scratched or damaged.
Avoid scratching or damaging the surface
when using the washer.
Cleaning mesh filter
Clean the mesh filters in the water inlets once or twice a year.
1. Turn off the washer, and then unplug the
power cord.
2. Close the faucet.
3. Loosen and disconnect the water hoses
from the back of the washer. Cover the
hoses with a cloth or towel to prevent
water from gushing out.
4. Use pliers to pull out the mesh filter from the
inlet valve.
5. Submerge the mesh filter deeply in water
so that the threaded connector is also
submerged. Carefully remove any debris
from the filter.
6. Dry the mesh filter completely in a
shaded area.
7. Reinsert the mesh filter into the inlet valve,
and reconnect the water hose to the inlet
valve.
8. Open the faucet.
NOTE
If the mesh filter is clogged, the “4C” information code appears on the the washer’s display screen.
Cleaning the dispensers
The automatic dispenser may need to be
cleaned periodically due to laundry additive
buildup.
1. Pull the dispenser drawer straight back
until it stops.
WA8700M_DC68-03774B-04_EN.indd 53 2019-02-14 5:37:21