Samsung VP-A50, Service Manual

Page: 52 / 166

Alignment and Adjustment
Samsung Electronics 5-9
7. R-Y Gainplus
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video output jack to waveform monitor
input jack and monitor TV jack.
4) Press the ÒF.F (MODE UP)/REW (MODE
DOWN)Ó button so that the OSD state is
ÒADDR:36 DT1:XX DT2:XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lux.
6) Adjust the ÒPLAY (DATA UP)/STILL(DATA
DOWN)Ó button so that the red level is
500mVp-p ± 35mV.
7) Press the ÒSTOP (CONFIRM)Ó button to
memorize setting.
8) DT1 and DT2 become same.
500mVp-p
8. B-Y Gainplus
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video output jack to waveform monitor
input jack and monitor TV jack.
4) Press the ÒF.F (MODE UP)/REW (MODE
DOWN)Ó button so that the OSD state is
ÒADDR:33 DT1:XX DT2:XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lux.
6) Adjust the ÒPLAY (DATA UP)/STILL (DATA
DOWN)Ó button so that the blue level is
350mVp-p ± 35mV.
7) Be sure to press the ÒSTOP (CONFIRM)Ó button to
memorize setting.
8) DT1 and DT2 become same.
350mVp-p
9. R-Y Hue Minus
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video output jack to vectorscope input
jack and monitor TV jack.
4) Press the ÒF.F (MODE UP)/REW (MODE
DOWN)Ó button so that the OSD state is
ÒADDR:31 DT1:XX DT2:XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lux.
6) Adjust the ÒPLAY (DATA UP)/STILL (DATA
DOWN)Ó button so that the yellow vector is
165 ± 10 deg.
7) Press the ÒSTOP (CONFIRM)Ó button to
memorize setting.
8) DT1 and DT2 become same.
YELLOW VECTOR
165 DEG.
10. B-Y Hue Minus
1) Camera ÒE-EÓ, 3100¡K color bar chart.
2) Video(output) jack and register of EEPROM.
3) Connect video output jack to vectorscope input
jack and monitor TV jack.
4) Press the ÒF.F (MODE UP)/REW (MODE
DOWN)Ó button so that the OSD state is
ÒADDR:30 DT1:XX DT2:XXÓ.
5) Aim the camera at a color bar chart illuminated at
1500 to 2000 lux.
6) Adjust the ÒPLAY (DATA UP)/STILL (DATA
DOWN)Ó button so that the cyan vector is
285 ± 10 deg.
7) Press the ÒSTOP (CONFIRM)Ó button to
memorize setting.
8) DT1 and DT2 become same.
CYAN VECTOR 285 DEG.