Starting Up…
Welcome
4G LTE
Verizon 4G LTE
4G LTE
In Service
For More Information
• For the latest documentation, additional troubleshooting steps, or to learn more about advanced settings and the
device’s web interface, find the downloadable User Guide at
www.verizonwireless.com/support/4g-lte-network-extender/.
• Or call customer support toll free at 800-922-0204.
What if my Display still shows “Searching for GPS” after one hour?
If necessary, use the included 23’ GPS extension cable, so that the GPS antenna can be placed as close to a window as
possible. Follow the steps below to attach the GPS extension cable.
1. Firmly press down on and slide the protective cover as shown to expose the rectangular GPS antenna.
2. Pull the GPS antenna out and attach GPS extension cable and reattach GPS antenna in line.
3. Replace the GPS cover and place the GPS antenna in a new location close to a window.
Verizon 4G LTE
Network Extender
Quick Start Guide
Confirm your 4G LTE Network Extender in Service
Once the Network Extender is in service, your phone must be within 50 feet horizontally of the unit.
To verify your Verizon phones are connected to the Network Extender:
1. Ensure your Verizon Wireless 4G LTE mobile handset is enabled for Advanced Calling.
2. Dial #48 from your mobile phone and listen for the following confirmation: “You are under 4G LTE Network
Extender coverage …“
3. Some phones may show a home icon.
Note: The range of the Network Extender is dependent on the strength of the existing Verizon Wireless network
coverage. The use of this unit is recommended for areas where 1 bar or less is observed on your phone.
SLS-BU103
Version VSR 1.0
EP96-04526A Revision 4
Troubleshooting
Make a call on your 4G LTE Network Extender
When the Network Extender powers on, the Power / Status Indicator LED will be solid blue. During start-up and
self-configuration, the LED will blink. After successful start-up, the LED will return to solid blue and the display
will show “In Service.” Pressing the Button next to the display will show additional information about your
Network Extender.
What if my display still shows ‘Connecting to the Verizon Network’ after one hour?
You may have to change the settings on your router. Please refer to the Troubleshooting section of the User Guide before
calling Verizon or go to www.verizonwireless.com/support/network-extender-router-configuration/
Item Specification
Manufacturer
Futaba
Model Type.
ELW0901AA
Resolution
128 x 36
Pixel Pitch
0.17 x 0.17 mm
Active Area
21.734 x 6.095 mm
Glass Size
25.28 x 9.9 mm
IC
LD7032
Color of Illumination
White
Gray Scale
2
Luminance
500 cd/m
2
Circular Polarizer (CPL)
Without CPL
Drive Method
Passive Matrix
Power Supply Voltage
13V/1.8V (Typ.)
Mass
0.64
±
0.4g
LCD Icons
Display Example
Power
/Status
Indicator
Device Display
Verizon 4G LTE
Verizon 4G LTE
GPS Indicator
Call Indicator
Item Specification
Manufacturer
Futaba
Model Type.
ELW0901AA
Resolution
128 x 36
Pixel Pitch
0.17 x 0.17 mm
Active Area
21.734 x 6.095 mm
Glass Size
25.28 x 9.9 mm
IC
LD7032
Color of Illumination
White
Gray Scale
2
Luminance
500 cd/m
2
Circular Polarizer (CPL)
Without CPL
Drive Method
Passive Matrix
Power Supply Voltage
13V/1.8V (Typ.)
Mass
0.64
±
0.4g
LCD Icons
Display Example
Power
/Status
Indicator
Device Display
Verizon 4G LTE
Verizon 4G LTE
GPS Indicator
Call Indicator
