Disassembly and Assembly
59
Main PBA Assembly
Leaving screws inside the computer may damage internal components, such as
the battery. When assembling, be extra careful not to leave any unassembled
screws inside the computer.
1
Prepare the Main to Sub cable adhesive tape and attach to the left side of Main to Sub
connector port on the main PBA.
The white handle of the Main to Sub cable adhesive tape should be placed to the
upper side.
2
Place the main PBA to the Case front in accordance with the guide pole of the Case
front.
Check if there is no cable under the main PBA.
Summary of Contents for VENUS3-16 EXT
Page 1: ...www samsung com REPAIR GUIDE NP960XFH English Rev 1 0...
Page 15: ...Exploded View and Parts List 15 ExplodedViewand Parts List ExplodedView...
Page 55: ...Disassembly and Assembly 55 11 Remove the touchpad film jig and tape 3 ea...
Page 61: ...Disassembly and Assembly 61 4 Place the heatsink following 6 screw holes...
