MICRO FILTER
6
CARE OF MOTOR FILTER
The motor filter protects the motor
from dirt and ensures long-lasting and
efficient operation.
Wash the motor filter in warm water,
dry it thoroughly, and position it in
place.
REPLACING THE MICRO FILTER
●
The micro filter filters the air which comes
out from the vacuum cleaner.
●
To open the filter cover, press down and
pull it simultaneously.
●
Remove and replace the exhausted
micro filter.
●
Close the cover.
It is advisable to replace the micro filter
when 10 dust bags have been replaced.
CLOTH FILTER BAG
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
MOTOR FILTER
Before use, make sure that the position of the selector button is in the right position for
the type of surface to be cleaned.
●
In order to maintain best cleaning efficiency, keep floor brush clean using crevice tool
after use.
Push the side
①
when cleaning the capets.
Push the side
➁
when cleaning the floor, tile,mat,etc.
RUG/FLOOR SELECTOR
①
➁
There are two types of dust bag according to the model, one is paper dust bag type
the other is cloth filter bag type.
NOTE :
DJ68-40131M(0.1) 2002.9.28 1:30 PM
7
