EN-7
REPLACING THE DUST BAG
1) To open the dust cover of the dust bag
compartment, press the clamper
upwards.(The clamper is located at the
front of the dust cover)
2) Remove the dust bag from the cleaner.
FOR CLOTH FILTER BAG
MAINTENANCE OR REPLACEMENT OF THE FILTERS
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
INLET FILTER
To protect the motor, your cleaner features a secondary filter at the front of the motor in the
dust compartment. Do not allow the filter to become clogged. Suction power reduction or
motor damage may result. After cleaning the secondary filter attach it in place.
▲
SECONDARY FILTER
SECONDARY FILTER
OUTLET FILTER
▼
NOTE:
The filters must be completely dried before being replaced in the dust compart-
ment.
1) Open the grille part, separate the
exhausted filter.
2) Reassemble it after cleaning or replac-
ing the filter in the reverse order.
3) After removing the used dust bag, insert
the cardboard bag collar of the new dust
bag into its original position.
4) Press the dust cover down gently until the
clamper relocks.
DJ68-00068Y 9/2/03 1:03 PM Page 8
Summary of Contents for VAC5913B
Page 20: ...DJ68 00068Y REV 0 1 ...
