•
When connecting the
Invisible Connection, use a Bending Cover, which prevents the cable of the
Invisible Connection from being bent at a 90 degree angle. Failure to do so may cause damage to the
cable.
•
When connecting the
Invisible Connection, pay attention to the shapes of its connectors so that they
are connected correctly. Failure to do so may cause product malfunction.
•
After connecting the Invisible Connection, wind the remaining cable around the cable holder of the
Invisible Connection. Just winding or leaving the remaining cable as it is may cause damage to the
cable.
•
When connecting the
Invisible Connection, be careful not to twist the cable of the Invisible Connection.
Failure to do so may cause performance degradation to the TV or damage to the cable.
•
To prevent the Invisible Connection from being damaged, do not subject the Connection to the
following:
Bending
Twisting
Pulling
Stepping on
Pressing on
CLASS 1 LASER PRODUCT
•
Caution - Invisible laser radiation when open. Do not stare into beam.
–
Do not bend or cut cables excessively.
–
Do not place heavy objects on the cable.
–
Do not disassemble the connector of the cable.
•
Caution - Use of controls, adjustments, or the performance of procedures
other than those specified
herein may result in hazardous radiation exposure.
English - 9
