Samsung un65ju7500fxza, E-Manual, Page: 126 / 161

120
There Is a Problem with the Picture
Testing the picture
(
메뉴/123
)
메뉴 Support Self Diagnosis Picture Test
Try Now
Before you review the list of problems and solutions below, use Picture Test to determine if the
problem is caused by the TV. The Picture Test displays a high definition picture you can examine for
flaws or faults.
The problem Try this!
Flickering and Dimming
If your Samsung Television is flickering or dimming sporadically, you may need to
disable some of the energy efficiency features. Disable
Energy Saving
((
메뉴/123
)
메뉴 System Eco Solution Energy Saving
) or
Eco Sensor
((
메뉴/123
)
메뉴 System Eco Solution Eco Sensor
).
Component
Connections/Screen
Color
If the color on your Samsung television screen is not correct or the black and
white colors are off, run
Picture Test
((
메뉴/123
)
메뉴 Support Self
Diagnosis Picture Test
).
If the test results indicate that the problem is not caused by the TV, do the
following:
●
Confirm that the TV's video input connectors are connected to the correct
external device video output connectors.
●
Check the other connections as well. If the TV is connected to an external
device via a component cable, confirm that the Pb, Pr, and Y jacks are plugged
into their proper connectors.
Screen Brightness
If the colors on your Samsung TV are correct but just a little too dark or bright, try
adjusting the following settings first.
●
Go to the
Picture
menu and adjust the
Backlight
,
Contrast
,
Brightness
,
Sharpness
,
Color
, and
Tint (G/R)
settings.
Auto Motion Plus/Blur
If you notice ghosting or blurring on the screen, use the
Auto Motion Plus
function
((
메뉴/123
)
메뉴 Picture Picture Options Auto Motion Plus
) to resolve the
issue.
Unwanted Powering
Off
If your Samsung TV appears to turn off by itself, try disabling some of the TV's
energy efficiency functions. See if
Sleep Timer
((
메뉴/123
)
메뉴 System
Time Sleep Timer
) has been enabled. The
Sleep Timer
automatically turns the
TV off after a specified period of time. If the Sleep Timer has not been enabled,
see if
No Signal Power Off
((
메뉴/123
)
메뉴 System Eco Solution No
Signal Power Off
) or
Auto Power Off
((
메뉴/123
)
메뉴 System Eco Solution
Auto Power Off
) has been enabled and disable them.