Samsung Ubigate iBG3026, Installation Manual

Page: 38 / 132

CHAPTER 2. Pre-Installation Requirements
12
© SAMSUNG Electronics Co., Ltd.
Class 1 Laser Product
The iBG3026 uses laser transceiver Small Form Pluggable (SFP) modules on
some ports.
Invisible laser radiation may be emitted from disconnected fibers or
connectors.
Do not stare into beams or view directly with optical instruments.
Cover Panels
Do not operate the iBG3026 with missing blank faceplates and cover panels.
These covers prevent exposure to hazardous voltages and currents inside the
chassis. They are important to maintaining proper air flow through the chassis.
They also prevent electromagnetic interference (EMI) that might disrupt other
equipment.
Laser radiation and EMI are present when the router cover panel is
open.
Electrostatic Discharge (ESD) Warning
When handling iBG3026 components, wear grounding wrist straps to
avoid ESD damage to the card. Do not directly touch the backplane
with your hand or any metal tool, or you could shock yourself.
To protect against ESD damage to the iBG3026 and its components:
y
Always use an ESD wrist or ankle strap with good skin contact. Remember,
ESD straps only protect against ESD charges on your body. Contact with
unstrapped bodies or your own clothing can cause ESD damage.
y
Connect the equipment end of the strap to an unfinished chassis surface.
y
Use care when seating or unseating modules or interface cards. Tighten the
captive installation screws to ensure a proper connection when inserting
modules or interface cards.