manualshive.com logo in svg

Samsung Ubigate iBG3026, Installation Manual, Page: 111 / 132

Share
Download
Samsung Ubigate iBG3026 Installation Manual Download Page 111

 

Ubigate iBG3026 Installation Manual/Ed.01 

© SAMSUNG Electronics Co., Ltd.

 

85

 

Installing Compact Flash Memory Cards 

Compact Flash memory cards are sensitive to Electrostatic Discharge (ESD) 
Damage, which can occur when electronic cards or components are handled 
improperly, resulting in complete or intermittent failures. 
 

 

To prevent damage to the iBG3026, do not remove a Compact Flash 
memory card from the chassis while it is being accessed (when the 
CF LED is blinking). 

 

Removing a Compact Flash Memory Card 

The Compact Flash slot is located on the iBG3026 board. 
 

1. 

Depress the Compact Flash memory card ejector button to eject the 
module. 

 

2.

  Pull the Compact Flash memory card out of its slot. 

 

Figure 5.8    Removing a Compact Flash Memory Card 

 

Installing a Compact Flash Memory Card 

1.

  Align the Compact Flash memory card with the slot. 

 

2.

  Push the memory card into the slot making sure it is fully inserted. 

Summary of Contents for Ubigate iBG3026





































































































































Reviews:

No comments