Samsung Ubigate iBG1003 Installation Manual Download

Page: 50 / 72

CHAPTER 5. Option Module Installation

5-2

ATOP-1 (1-Port ADSL over POTS Mini-Module)

This module provides an ADSL interface connecting to the Central Office

through a POTS line.

Figure 5.1 ATOP-1 Mini-Module

ADSL Port LEDs

LED

Indication & Color

Description

LINK

GREEN

Link is connected.

Blinking Green

Link is not connected.

OFF

Port is not connected.

ACT

GREEN

Transmit/Receive is OFF.

Blinking Green

Transmit/Receive is ON.

OFF

Port is not connected.

The module has one ADSL port and one Ethernet port. The ADSL port should

be connected with POTS network. However, the Ethernet port is for use in

other iBG models. Therefore, the Ethernet port should not be connected to any

other device or port.

ATOP-1

ADSL

LAN

LINK

ACT

Summary of Contents for Ubigate iBG1003









































































Search results

Summary of Contents for Ubigate iBG1003

Reviews:

Related manuals for Ubigate iBG1003

Brands by name

Popular brands

Samsung Ubigate iBG1003, Installation Manual

Search results

Summary of Contents for Ubigate iBG1003

Reviews:

Related manuals for Ubigate iBG1003

Brands by name

Popular brands