Samsung Ubigate iBG1003, Installation Manual

Page: 26 / 72

CHAPTER 1. Ubigate iBG1003 Overview
1-2
© SAMSUNG Electronics Co., Ltd.
Overview of Ubigate iBG1003 Router
This section describes front and rear side components of the Ubigate iBG1003.
Additional information is also provided about external cables, wiring, and
connection points.
Ubigate iBG1003 Front Side
The front side of the Ubigate iBG1003 has LEDs to indicate the iBG1003
router’s performance and operation status, as shown in figure below.
Figure 1.1 Ubigate iBG1003 Front View
Proper LED status is shown in the following table.
LED Indication & Color Description
(Power)
Solid blue
Power supply installed and operating normally.
Amber Power supply installed but power fault
condition detected.
Off
Power supply not present or Power supply
malfunctioning.
SYS
Solid green System is operating normally.
Solid red
System is not operating normally.
Amber System diagnostic mode.
Off Router is not receiving power.
IOM Solid green IOM (Internal Option Module) card present and
operational.
Solid red
IOM card present but not operational.
Off IOM card not present.