C
HAPTER
T
HREE
: TV O
PERATION
3
.6
O
P E R AT I O N
3
Press the
VOL +
button.
The TV will begin memo-
rizing all of the available
channels.
4
After all the available
channels are stored, the
Auto program menu reap-
pears. Press the
MENU
button twice to exit.
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press
MENU
at any time to interrupt
the memorization process and return
to the Channel menu.
2
Press the
CH
▼
button to
select “Auto program”.
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~4
on previous page.
Press the
MENU
button,
then press the
CH
▼
but-
ton twice to select
“Channel.”
Press the
VOL +
button to
access the Channel sub-
menu.
Note: Channel auto program does not function when the
V-chip is active.
