Tip
Larger expansion cards may require you to attach the PCIe power connector before inserting
the card into the slot.
9. Attach the case cover.
.
10. Connect all cables and external attachments.
11. Connect the power cord to the electrical outlet.
12. Power on the device.
Fan installation
To ensure adequate cooling, the NAS contains a fan module with two fans on the right panel, and three
system fans on the chassis behind the rear panel.
For details, see the following:
•
•
Removing the fan module
The fan module contains two fans and is located on the right panel.
.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
TS-1655 User Guide
Installation and Configuration
36