2. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware installation
This section provides information on installing drives, memory modules, expansion cards, fans, and
expansion units.
Removing the case cover
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
1. Power off the device.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the case cover.
a. Remove the screws on the rear panel.
b. Slide the cover back.
c. Lift the cover off the device.
TS-1655 User Guide
Installation and Configuration
15