background image

 To avoid eyestrain, do not sit too close to the product.

 Take a rest for at least five (5) minutes after using the monitor for one

(1) hour.

This reduces eye fatigue.

 Do not install it in an unstable location such as an unstable rack or

uneven surface or a location exposed to vibrations.

Otherwise, it may fall and cause personal injury and/or damage the
product.

If you use the product in a location exposed to vibrations, it may
damage the product and result in fire.

 When moving the product, turn the power off and disconnect the power

plug, antenna cable, and all the cables connected to the product.

Otherwise, it may result in electric shock or fire.

 Ensure that children do not hang onto the product or climb up onto the

product.

The product may fall and cause personal injury or death.

 If you do not use the product for a long period of time, disconnect the

power cord from the power outlet.

Otherwise, this may result in overheating or fire due to dust, and may
result in fire due to electric shock or leakage.

 Do not place any heavy items or toys or confectionery, such as cookies

etc. that may attract the attention of children and to the product.

Your children may hang onto the product causing it to fall and this
may result in personal injury or death.

 Be careful that children do not place the battery in their mouths when

removed  from  the  remote  control.  Place  the  battery  in  a  location  that
children or infants cannot reach.

If children have had the battery in their mouths, consult your doctor
immediately.

 When replacing the battery, insert it with the right polarity (+, -).

Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.

 Use only the specified standardized batteries, and do not use a new

battery and a used battery at the same time.

Otherwise, the batteries may be damaged or cause fire, personal in-
jury or damage due to a leakage of the internal liquid.

Safety Instructions

Summary of Contents for SyncMaster 460TSN








































































































































































Reviews: