Installing the Product
2-5
2-5
Connecting with a PC
The connecting part may differ depending on the product model.
1.
Connect the product to a PC depending on the video output supported by the PC.
•
When the graphics card provides D-Sub
(<
Analog
>)
output
•
Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
•
When the graphics card provides DVI
(<
Digital
>)
output
•
Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
2.
Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the
220V or 110V wall outlet.
(The input voltage is switched automatically.)
When the product is connected to a PC, you can turn the product on and use it.
When both the DVI (<Digital>) and D-Sub (<Analog>) cables are connected, you can select the input signal <Analog/
Digital> by pressing the
button.
