Phone Settings
90
Display Settings
(Menu 4.7)
Brightness
(Menu 4.7.1)
This option allows you to adjust the brightness of
the display to see it better in different lighting
conditions.
To adjust the display brightness, proceed as follows.
1. Adjust the brightness using the
and
keys
or the
and
keys on the left side of the
phone.
2. When you are satisfied, press the
OK
soft key to
save the selection.
Back Light
(Menu 4.7.2)
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
Select the length of time for which the backlight is
on. The backlight comes on when you press a key
or receive a call or message and lights up for the
specified length of time. Then it dims and finally
switches to the digital clock, conserving your
battery power.
If you do not want to use the backlight, select
Off
.
Service Light
(Menu 4.7.3)
This option allows you to select whether or not the
service light on the top left of the phone is used and
in which colour it flashes.
Select one of the seven colours available. When the
phone is ready for use, the service light will flash in
the appropriate colour.
If you do not wish to use the service light,
select
Off
.
Phone Settings
91
Graphic Logo
(Menu 4.7.4)
This option allows you to display your operator’s
logo instead of its name.
On
: the operator logo stored in your phone is
displayed in idle mode; if no logo has been stored,
the operator name is displayed.
Off
: the operator name is displayed in idle mode.
Extra Settings
(Menu 4.8)
You can turn the automatic redialling or answering
features on or off.
The following options are available.
Auto Redial
: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note
: The interval between two call attempts varies.
Anykey Answer
: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key, the
key and the
Reject
soft key. To reject the call, press the
key or
the
Reject
soft key.
When this option is unchecked, you can only press
the
key or the
Accept
soft key.
To turn a feature... Then press the...
On
On
soft key.
A check mark is displayed
in front of the option.
Off
Off
soft key.
The check mark is no
longer displayed.
Summary of Contents for SWGC100
Page 79: ...150 ...