Samsung SVM-400 Page 80 Technical Manual And User Manual Download

Page: 80 / 215

Port

The Port column gives you the number of the voice circuit that the call

is taking place on.

Mode

The Mode column tells you which Mode the port is in.

Active Block

This column shows you which block is currently servicing the

call, as the call gets directed through the call session.

Status

The status column displays the current condition that the port is in.

Some examples are; Idle, Processing, Transferring, messaging, etc.

SYSTEM ACTIVITY

Calls To –Date

The total number of calls that the SVM has processed.

Average Calls per Week

The average number of calls per week averaged over

all weeks.

Directory Accesses

The total number of callers that have accessed the direc-

tory.

Times All Ports Busy

The total number of times all ports have been busy.

Number of Subscribers

The total number of subscribers on the system.

Programming - Page 69

Summary of Contents for SVM-400
























































































































































































































Search results

Summary of Contents for SVM-400

Reviews:

Related manuals for SVM-400

Brands by name

Popular brands

Samsung SVM-400, Technical Manual And User Manual

Search results

Summary of Contents for SVM-400

Reviews:

Related manuals for SVM-400

Brands by name

Popular brands