![background image](http://html.mh-extra.com/html/samsung/sth-n395/sth-n395_user-manual_1189522066.webp)
129
128
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-and-
water solution.
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received.
Including interference that may cause undesired
operation.
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Antenna
A device for transmitting or receiving signals. The
size and shape of antennas is determined, in part, by
the frequency of the signal they receive. Wireless
phones and the base station must have antennas.
Call Diverting
Ability to reroute calls to another mobile or fixed
line.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Calling Line Identification Services (Caller-ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
H
He
ea
alltth
h a
an
nd
d S
Sa
affe
etty
y IIn
nffo
orrm
ma
attiio
on
n