Samsung STC-14, User Manual, Page: 14 / 17

Security IR Camera User’s Manual
26
Security IR Camera User’s Manual
27
SPECLAL SETUP
1.TV SYCTEM NTSC
2.LANGUAGE
3.COMM ADJ
▶ 4.RESET
5.RETURN
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE
INTERVAL
6. IMAGE ADJ
7. SPECIAL
8. SAVE
9. EXIT
MAIN SETUP
1. BRIGHTNESS AUTO
2. CONTRAST MANUAL
3. RANGE AUTO
4. NUC
5. NUC MOOE
INTERVAL
6. IMAGE ADJ
7. SPECIAL
8. SAVE
9. EXIT
… RESET (Reset) :
Use this option to restore each item to its default setting.
Press the SET button while the cursor is aligned with “4. RESET” to restore each item to its
factory default setting. Please note, however, that neither TV SYSTEM nor COMM ADJ can be
changed. Select “5. RETURN” to go back to the SPECIAL SETUP menu screen.
Use this option to save device settings and establish the basic settings which will be used the next
time you start up the device. Press the SET button while the cursor is aligned with “8. SAVE” to
record your current settings to the internal memory. If you exit without saving, the MAIN SETUP
menu will close without any values being updated.
Press the LEFT button or RIGHT button while the cursor is aligned with “5. DISPLAY ID” to
switch the CAMERA ID display setting from: ON
⇒
OFF
⇒
ON. Select “6. RETURN” to confirm
the current setting and go back to the SPECIAL SETUP menu screen. (Default value: OFF)
Press the SET button while the cursor is aligned with “9. EXIT” to close the MAIN SETUP menu.
①
After switching BRIGHTNESS and/or CONTRAST to MANUAL and saving your changes, images
may not be displayed the next time you restart the device. To render images in such a case, set
BRIGHTNESS and/or CONTRAST to “AUTO” or readjust the MANUAL setting.
②
If you save after changing the RS485 communications CAMERA ID, the ID will then be set/stored.
If the CAMERA ID was set incorrectly, exit without saving.
Operating the Camera
SAVE
EXIT (close menu)
• Do not disengage the power while settings are being saved.
Notes