English
53
Operations
Icemaker bucket
If you do not dispense ice for an extended
period, ice may form clumps inside the
bucket. If this happens, remove and empty
the icemaker bucket.
1.
To remove the icemaker bucket, gently
lift it up and pull out slowly while
holding the handgrips with both hands.
2.
Remove and empty the icemaker
bucket.
3.
When done, turn the gear handle on the
rear of the bucket by 90°, and then put
the bucket back into position. Make sure
the bucket is inserted properly until you
hear a clicking sound.
4.
Press and hold
Ice Maker
for 3 seconds
to reset the ice maker.
CAUTION
• Do not apply excessive force to the
bucket cover. The cover may break.
• Do not close the door hard. Water may
spill over the ice maker.
• To prevent injury, make sure to clean
up any ice or water that has fallen on
the floor.
• To prevent accidents or injury, do
not let children play with the water
dispenser or the ice maker.
• Do not put your hand or an object into
the ice chute. This may cause physical
injury or product damage.
NOTE
• Any sound from the ice maker is normal, which outputs during the ice making process.
• While the door is open, neither the ice maker nor the water dispenser operates.
Summary of Contents for SRS67 Series
Page 1: ...Refrigerator User manual Free Standing Appliance ...
Page 66: ...Memo ...
Page 67: ...Memo ...
